Supporting a multitude of microcontrollers can be quite a challenge. Each of you has its own unique setup, workflow, and components. Adding extra logging to the connector will make it…
mfs2020
-
-
Added: COM_STBY_RADIO_SET = 260 + 123.450 COM2_STBY_RADIO_SET = 261 + 123.450 Logs to several connector events Changed: Visual overhaul of the dashboard Dashboard overview Dashboard logic How com ports +…
-
The output menu was buggy, looked dated, and was difficult to navigate, if I may say so myself. Let me quickly give you an overview of what has changed before…
-
While the temperatures are rising, it’s time for our first summer update! You guys have requested logs for quite some time, but they finally arrived. The first batch of logged…
-
Used in this project: Arduino Mega, provided by DFRobot go check them out over at: https://www.dfrobot.com/product-1175.html (All links below are affiliate links that help support the channel) Multiposition switches x2…
-
I’ve always used Thingiverse.com to distribute my 3D files in the past. It got the job done but could cause quite the frustration as well. Luckily Prusa has stepped up…
-
This will be the first update since version 1.0.0 that improves the quality of life. It requires a reinstallation of the WASM module to utilize all the features. Don’t forget…
-
With the release of connector version 0.9.5.5, I’ve introduced new ways to calibrate your rudder pedals, yokes, and brakes. My main setup uses the Thrustmaster TFRP pedal set (https://amzn.to/3pEFqZd). They…
-
Statuses The connector now displays the connection state to the game and your boards more clearly. Boards Green, all boards are connected Yellow, 1 board or more refused a connection…
-
Used in this tutorial (Amazon affiliate links that help support the channel): Springs: https://amzn.to/318h28k Arduino Leonardo / pro micro https://amzn.to/3mx3HyS or https://amzn.to/2ZBDaaD LEDs https://amzn.to/3pUgJsk Limit switches https://amzn.to/3GAzBT1 Gear I use:…